MENU
KA&MELOCK KM 17
KA&MELOCK KM 17 is an elastomer bonding agent suitable for top coat use. It should be used in combination with KA&MELOCK MP 05 primer when high temperature corrosion resistance and dynamic resistance are required for bonding various elastomers to metal and plastic surfaces during the vulcanization process. In some cases, KA&MELOCK KM 17 can be used as a single coat.
Even though coating with KA&MELOCK KM 17 provides good corrosion, oil and solvent resistance, especially corrosion and heat resistance of the part increases when applied together with KA&MELOCK KM 17 + KA&MELOCK MP 05 primer. KA&MELOCK KM 17, Natural rubber (NR), Polyisoprene (IR), Polybutadiene (BR), Styrene butadiene (SBR), Nitrile (NBR), Chloroprene (CR), Butyl (IIR) and Ethylene Propylene (EPDM) based rubber compound adheres to a wide range of metals and plastics during vulcanization process.
The combination of KA&MELOCK MP 05 + KA&MELOCK KM 17 is ideal for soft NBR and NR blends, especially in the production of TM and IM.
Technical Data
|
Colour |
Brown Liquid |
|
Viskozite 4 mm DIN-Cup |
80 – 120 s |
|
Viskozite, cps@25°C(77°F)
Brookfield SNB1
|
200 – 600 mPas |
|
Specific Gravity |
0,96 – 1,04 g/cm³ |
|
Solid Content |
22 – 26 % Ağırlık |
|
Solvents |
Xylene |
*Data is typical and not to be used for specification purposes.
We believe the accurate testing and analysis is power. As WBKim Kimya, all of our products are tested and recorded in our laboratories. In addition, our R&D studies continue by making product development in our demo facility.
To find out which KA&MELOCK adhesive to use, talk to our team and let us know your adhesive base, application methods, elastomer and substrate. We will send you a list of recommended KA&MELOCK adhesives.
Increase the value of your products with KA&MELOCK quality. Our support teams are always at your service.